F300X Pressure Reducing Valve
300X slow closing check valve is an intelligent valve installed at the pump outlet of high-rise building water supply system and other water supply systems to prevent the phenomenon of medium backflow, water hammer and water hammer. The valve has three functions: electric valve, check valve and water hammer eliminator, which can effectively improve the safety and reliability of water supply system. The technical principles of slow opening, quick closing and slow closing to eliminate water hammer are integrated to prevent water hammer from starting and stopping. Only need to operate the pump motor on and off button. The valve can be opened and closed automatically according to the operation rules of water pump, with large flow rate and small pressure loss. It is suitable for valves with diameter less than 600.
Filter should be installed before 300X slow closing check valve, and it should be convenient for blowdown. Hydraulic control valve is a kind of self-lubricating valve body, which does not need additional oil lubrication. In case of damage to the internal parts of the main valve, please disassemble it according to the following instructions.
Hydraulic control valve is the valve controlled by water pressure. The hydraulic control valve is composed of a main valve and its attached pipe, pilot valve, needle valve, ball valve and pressure gauge. According to the purpose, function and place, it can be developed into remote control ball valve, pressure reducing valve, slow closing check valve, flow control valve, pressure relief valve, hydraulic electric control valve, water pump control valve, etc.
FAQ
Q1: Are you trading company or manufacturer ?
A1: We are factory.
Q2:Can i have my own Logo on the product?
A2: Yes, you can send us your drawing and we can make your logo, but you have to bear their own the cost.
Q3:Can you produce the products according to my own drawings?
A3:Yes,we can produce the products according to your drawings that will be most satisfy you.
Q4:Can I request to change the form of packaging and transportation?
A4:Yes,We can change the form of the packaging and transportation according to your request, but you have to bear their own costs incurred during this period and the spreads.
Q5: Can i request to advance the shipment?
A5: It should be depends on whether there is sufficient inventory in our warehouse.
Q6: What is your terms of payment ?
A6: Payment<=1000USD, 100% in advance.
Payment>=1000USD, 30% T/T in advance ,balance before shippment.
Audited Supplier 
){kind=link}
){kind=link}