Water Flow Control Pressure Reducing Valve

• Customization: Available
• Temperature: Low Temperature
• Certification: ISO9001
• Model NO.: Y200X
• Media: Water
• Standard: Standard
• Connection Mode: Flange
• Power: Manual
• Material: Ggg40
• Type: Single Seater
• Transport Package: Plywood Wooden Box
• Specification: DN50-DN300
• Trademark: BTVAL
• Origin: Hebei China
• HS Code: 8481804090
• Production Capacity: 10000 Pieces/Year

Product Description

                                          Y200X Water Flow Control Pressure Reducing Valve

 

Deatils
Pressure Reducing Valve automatically reduces a higher inlet pressure to a steady lower downstream pressure,
regardless of changing flow rate and/or varying inlet pressure.
This valve is an accurate, pilot-operated regulator capable of holding downstream pressure to a re-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight.
Our Pressure Reduing Valve are adopt the lastest technologies, with fully bore design, lowest head lose when fully open.
The Pressure Reducing Valve is design with anti-cavitation for application where there is high potential for damage from Cavitation, which provide optimum internal pressure control through a unique anti-cavitation trim design.

1. Body/Bonnet: GGG50 or Stainless Steel

2. Spring: SS304
3. Stem: SS / Bronze

4. Disc Retainer: DI/SS/Bronze
5. Seat: SS/Brass

6. Seal Rings: NBR/EPDM
7. Pilot: Stainless Steel

8. Pipe or Tubes: Coppe or Stainless Steel
9. Working Pressure: PN10/16/25
10. Connection: Flanged acc. To EN1092.2, ISO 7005-2, ANSI/JIS/ AS2129
11. Epoxy Resin Coated to 300 microns inside & outside
12. Anti-cavitation Solutio

 

FAQ                                                                                                                      
Q1: Are you trading company or manufacturer ?
A1: We are factory.

Q2:Can i have my own Logo on the product?
A2: Yes, you can send us your drawing and we can make your logo, but you have to bear their own the cost.

Q3:Can you produce the products according to my own drawings?
A3:Yes,we can produce the products according to your drawings that will be most satisfy you.

Q4:Can I request to change the form of packaging and transportation?
A4:Yes,We can change the form of the packaging and transportation according to your request, but you have to bear their own costs incurred during this period and the spreads.

Q5: Can i request to advance the shipment?
A5: It should be depends on whether there is sufficient inventory in our warehouse.

Q6: What is your terms of payment ?
A6: Payment<=1000USD, 100% in advance.

Payment>=1000USD, 30% T/T in advance ,balance before shippment.