Soft Seal Gate Valve

• Media: Water
• Temperature: Ordinary Temperature
• Type: Dual-through
• Material: Cast Iron
• Connection Form: Flange
• Pressure: Ordinary Pressure
• Model NO.: Z45X
• Actuator: Manual
• Seal Surface: Parallel Gate Valve
• Thread Position of Valve Rod: Inside Gate Valve
• Usage: Drain
• Standard: GB
• Application: Industrial Usage
• Transport Package: 4/5000 Wooden Box
• Specification: Dn1200
• Trademark: Air Traffic
• Origin: Hebei, China
• HS Code: 8481804090
• Production Capacity: 5000conditions

Product Description

Soft Seal Gate Valve
1200 gate valve is one of the commonly used cut-off Valve, which is mainly used to connect or cut off the medium in the pipeline, and not fluid corrosion sealing surface relative movement between small, not easy to scratch, mostly for low, medium and high pressure medium and large caliber. Features of 1200 Gate Valve: smooth passage, small flow coefficient; reliable seal, easy and flexible operation. 1200 gate valve technical specification: DN700 temperature: ≤100 °C MATERIAL: SPHEROIDAL GRAPHITE CASTING CONNECTION: Farlane has long been used in the market for the General Gate Valve, the General Existence of leakage, easy to rust phenomenon, the factory introduced technology produced by the Soft Seal Gate Valve, the utility model overcomes the defects of General Gate Valve such as poor sealing, elastic fatigue, easy rusting, etc. . The soft-seal Gate Valve makes use of the elastic gate to compensate the slight deformation and achieves a good sealing effect. The valve has the advantages of light switch, reliable sealing, good elastic memory and long service life. Application: widely used in tap water, sewage, construction, food, power, medicine, metallurgy, textile, energy and other fluid pipeline as regulation and closure device. FEATURES OF PRODUCT STRUCTURE: flat-bottom Valve seat -- The traditional gate valve is usually deposited in the groove of the valve bottom because of foreign materials such as stone, wood, cement, paper scraps and sundries after being washed by water, the bottom of the soft seal gate valve adopts the same flat bottom design as the water pipe. It is not easy to cause the accumulation of sundries and make the flow unimpeded. The whole package ---------------------------------------------------------------------------------------------------------------------------------------------- -- Not Easy to fall off and good elastic memory. The Foshan body is coated with powder epoxy to prevent corrosion and rusting of the body and to be used in sewage systems. Non-fragile traditional cast iron gate valve often because of foreign objects hit, collision or overlap and so on. This situation has been greatly reduced by the replacement of the valve body with ductile iron. Three "O" ring seal ring -- because the valve stem adopts three "o" ring seal ring seal design, it can reduce the friction resistance when the switch is on, greatly reduce the leakage phenomenon and can change the seal ring without stopping the water construction. It helps to Harvard as a result of the epoxy coating on the inside of the valve body, the inner and outer surfaces of the gate are protected from rusting water or corrosion. The investment-cast body -- is a cast body with a quasi-geometric size that allows the body to be sealed without any finish machining. The body is made of spheroidal graphite and its weight is 20% ~ 30% lighter than that of traditional gate valve. It is easy to install and maintain